RS232 Adapter (PA2)

Details of Product

• Mini Tester Is Easy To Test For Failed RS-232 Interfaces. Seven Lines Are Connected To Two Color LED's With The Most Commonly Used Lines: 2(TD), 3(RD), 4(RTS), 5(CTS), 6(DSR), 8(CD), And 20(DTR), It Consists Of One Male, One Female. DB-25 Connector And Requires No AC Of DC Power Sourec. It's Powered Directly From The RS-232 Port.

• Plastic / Metallized Are Both Available

Details of Product

• Check Tester Has 18 LED's For Check EIA Interface Problems, Just
  Plug Check Tester Between Custom Equipment, The Check Tester Has 18 LED's For Check EIA Interface Problems, Just Plug Check Tester Between Custom Equipment, The LED's Light Up Red For Postitve, Green For Negative, And Both Light Together For Proper Data Transfer Of EIA Lines 2, 3, 4, 5, 6, 8, 11, 19, And 20. LED's Light

Case :   

• Check Tester Has 18 LED's For Check EIA Interface Problems, Just Plug Check Tester Between Custom Equipment, The LED's Light Up Red For Postitve, Green For Negative, And Both Light Together For Proper Data Transfer Of EIA Lines 2, 3, 4, 5, 6, 8, 11, 19, And 20.

Details of Product

• Loopback Tester Set Has 4 LED's To Monitor Leads 2(TD) To 3(RD), 4(RTS) To 5(CTS), 6(DSR) To 20(DTR) And 15(TC) To 17(RC), It Can Be Data Verified Permits Date Dack To The Transmitting Device For Diagnostic Testing
  　

Case :   

• Plastic / Metallized Are Both Available

Details of Product

• Make A Custom Configuration For Your RS232 Interfaces By The Easiest Way. A Small PC Board Provides Solder Pads For Each Line From Both DB-25 Connectors, You Can Simply Soldering Jumpers Wires To Make A Connection , 24(Or 26) AWG Stripped Jumper Wire Sare Included And Re-Usable Snap-On Plastic Hood

Case :  

• Plastic / Metallized Are Both Available.

Details of Product

• Mini Wiring Adapter Permits Custom Configuration Of The RS-232 Interface. The Units Has DB-25 Connectors One Male And One Female And 48 Patching Sockets, With Pin 2 Through 25 (Pin 1 Protective Ground), Is Housed In A Snap-On Plastic Hood. 24 (Or 26) AWG Stripped Jumper Wires Are Included
  　

Case :   

• Plastic / Metallized Are Both Available

Details of Product

• Null Modem Replaces 2 Modems Install It Directly To Equipment Parts, Or Insert In Between Two Cables, To Communicate Without Using A Modem. The Inner Pin Configurations Are : Pin 1 And Are Connected Straight Throuth, Pin 2 And 3, Pin 11 And 12 Are Crossover, Pin 6. Pin 8 Pnd 20 Shorted Together, Any Circuits Are

Case :   

• Plastic / Metallized Are Both Available.

Details of Product

• This Rs-232 Pin 2 And 3 Reverser Adapter Can Helps Test For Common RS-232 Problem, The Reversal Of Transmit Data Pin 2, And Receive Data Pin 3.
  　

Case :   

• Plastic / Metallized Are Both Available.

Details of Product